Associated with the Szczecin-based Yacht Service shipyard, which has been operating since 1992 and specializes in the production of sailing yachts, motor yachts, and composite products. The shipyard works with international brands such as Leonardo Yachts, DaVinci Yachts, Mantra Yachts, Bente Yachts, and Permateek.He is involved in the RAKU 32 project, a catamaran incorporating biocomposites based on flax fibres, cork, and bio-based epoxy resin. He is also a co-author of a publication on the project featured in the “Biuletyn Techniki Jachtowej” [Yacht Technology Bulletin]. During the conference, he will present the shipyard’s practical experience with the use of new materials, as well as the challenges involved in implementing them in yacht production.

Designer and graphic designer. She graduated from the Faculty of Design at the Academy of Fine Arts in Warsaw. As part of her diploma project, supervised by Prof. Bartosz Piotrowski, she developed the interior design of a sailing yacht cabin. For three consecutive years, she received the Rector’s artistic and academic scholarship at the Academy of Fine Arts.She takes part in numerous design-related symposia, competitions, and workshops. She currently collaborates with the PUT Powertrain Student Research Group at Poznań University of Technology on the design and construction of an autonomous solar-hydrogen-powered motorboat.Her work covers a broad range of design disciplines, from product design and visual communication to 3D model visualisation and the graphic layout of books and catalogues. In her free time, she creates unique jewellery. Her greatest passion is sailing. She is currently studying at the Faculty of Mechanical and Industrial Engineering at Warsaw University of Technology.

Jeremi Lewandowski is a computer science student and a member of the PUT Powertrain Interfaculty Student Research Group at Poznań University of Technology. In the POWERboat project, he co-develops the autonomous boat system, programming mission control, trajectory planning and model predictive control algorithms, as well as PID controllers and microcontroller firmware. On the hardware side, he designs schematics and builds electronic systems, integrating single-board computers, inertial sensors, cameras, and actuators into a coherent and reliable system, including the enclosure, power supply, and cooling systems. The scale of the project required close teamwork, which proved to be just as important a part of the experience as the technical work itself.

Dr hab. inż. Wojciech Cieślik is an Assistant Professor at the Institute of Powertrains and Aviation at Poznań University of Technology and a researcher specializing in alternative propulsion systems in transport, including marine applications. He serves as the supervisor of the PUT Powertrain Interfaculty Student Research Group and as a tutor supporting students’ personal and academic development. He is the initiator and project leader of POWERboat, a solar-powered racing boat project that placed 6th in the AI class at the 2026 Monaco Energy Boat Challenge. He actively connects industry and academia by combining research, teaching, and student projects with the real needs of the marine sector. He is the author of numerous articles and the technical editor of the “Biuletyn Techniki Jachtowej” [Yacht Technology Bulletin], as well as a member of national teams responsible for the TWO.02 and TWO.12 professional qualifications. In his free time, he builds Italian-style wooden motorboats, including “Disco Volante”, a 3-metre motorboat made of pine and African mahogany and powered by a 25 hp engine.

Sebastian Uzarski has been involved in the marine industry for many years, where he passionately and professionally delivers comprehensive projects focused on the integration of modern onboard systems for boats and yachts. As a representative of Prime Marine, he has access to some of the most advanced premium solutions available, enabling him to successfully carry out projects appreciated by even the most demanding boat owners and users. He specializes in the configuration of audio systems, navigation plotters, onboard electronics, and increasingly popular electric propulsion systems. He has an excellent understanding of customer needs and is able to select solutions that combine the highest levels of functionality, aesthetics, and reliability. Marine technology is not only his profession, but above all his true passion. His extensive technical knowledge, practical experience, and individual approach to every project allow Sebastian to successfully complete even the most demanding and unconventional installations, ensuring customer satisfaction and confidence that every detail has been carefully addressed.

Marine Sector Specialist at Mirka Poland, responsible for the northern and southern regions of Poland, including the Pomeranian, Lower Silesian, Silesian, and Lesser Poland voivodeships. He is an expert in the preparation and polishing of surfaces on boats and other marine vessels, and conducts product demonstrations and training sessions on boat cleaning and polishing technologies using Mirka solutions, including Airos sanding heads. He is an active participant in industry events, including the International Yacht Industry Conference, Boat Technica, where he presents practical hull finishing methods and highlights the importance of precision and quality in shipyard processes.

Wojciech Hadka is an Aerospace Engineering student at Poznań University of Technology and a member of the PUT Powertrain Interfaculty Student Research Group. He has been involved in the construction of the POWERboat from the very beginning, from developing the structure and building the mould at the university, through the lamination process at the Green Dream Boats shipyard, to the current modifications of the completed vessel. As workshop manager, he is responsible for the team’s technical facilities and materials. He is also building a sailing simulator based on the POWERboat cockpit, enabling participation in the virtual Monaco Energy Boat Challenge.

MSc Eng. Jędrzej Zawartowski is an IT Specialist at the Faculty of Civil and Transport Engineering at Poznań University of Technology, focusing on the diagnostics and optimization of electric propulsion systems in marine applications. He is a co-supervisor of the PUT Powertrain Interfaculty Student Research Group, a co-author of research papers, and a speaker at events including the 2nd Motorboat Technology Symposium in 2024. He also co-authored a 2023 publication on the operation and diagnostics of electric yacht propulsion systems. As part of his project work, he supported the POWERboat team during the 2026 Monaco Energy Boat Challenge, where the PUT students placed 6th in the AI class.

Marcin Przywarty D.Sc., Eng. - Professor at the Maritime University of Szczecin, Poland, specializing in maritime navigation safety, marine traffic engineering, and the decarbonization of maritime transport and ports. He is the author of more than 50 scientific publications, including the monograph Navigation Safety in Offshore Wind Farm Areas. For over 20 years, he has participated in numerous national and international research projects, focusing on maritime safety, digitalization, and the green transition of the maritime sector. He is a member of PIANC and the International Maritime Lecturers Association (IMLA) and actively collaborates with industry partners on the development and implementation of innovative solutions for ports and maritime transport.

Eng. Wojciech Szarek is a Technical Sales Advisor at VETUS, where he has been working since 2018. In his role, he supports customers in selecting solutions for the marine industry, combining engineering knowledge with practical experience and both technical and commercial advisory expertise.

Eng. Tomasz Karczewski of Battery Partners is a graduate of Gdańsk University of Technology, where he studied Automation and Robotics at the Faculty of Electrical and Control Engineering. For the past seven years, he has been developing his expertise in battery technologies for electromobility and energy storage, and for the last three years he has worked as an R&D Engineer at Battery Partners. He applies his industrial experience to the design and implementation of battery solutions in projects such as boat electrification, battery-powered marine buoys, conversion of lead-acid battery systems to lithium technology, and renewable energy storage systems using second-life batteries from electric vehicles. Privately, he is passionate about modern technologies and runs the Wesoły Konstruktor YouTube channel.

Marta Zawadzka is the Co-Founder and Chief Designer at Intuition Yachts, where she is responsible for designing modern motor yachts and developing innovative concepts for the marine industry. She combines many years of experience in yacht design with a passion for design and new technologies, delivering projects presented at international industry trade shows.

Andrzej Charliński is associated with Mirka Poland, where he supports industrial customers in selecting tools, abrasives, and modern surface treatment technologies. He is also involved in technical presentations and industry events, promoting solutions that improve efficiency, process quality, and sustainability in industrial applications.

Dr Eng. Anna Skarbek-Żabkin is a Senior Associate at PwC, where she supports organizations in the areas of sustainability, energy transition, ESG strategy, circular economy, decarbonization, and responsible environmental communication. She combines consulting experience with scientific and technical expertise, helping clients design and implement solutions that address the challenges of economic and climate transformation. She is an expert in sustainability, electromobility, renewable energy sources, and alternative fuels, and holds a PhD in technical sciences with many years of experience in projects related to decarbonization, energy transition, and environmental efficiency. She is the author and co-author of scientific publications in the fields of environmental protection, transport, and electromobility, as well as the founder of the Forum Elektromobilności Foundation. She specializes in combining business, technological, and regulatory perspectives, helping organizations effectively implement ESG initiatives and build credible sustainability communication.

Tomasz Banaszek serves as a Key Account Manager at CX80, where he is responsible for developing cooperation with key clients and building long-term business relationships. Drawing on his experience in sales and consulting, he supports partners in selecting solutions tailored to their needs and in achieving shared business goals.

Szymon Strychalski is a naval architecture engineer by education. For the past two years, he has been working at VETUS, where he is responsible for technical consulting and training, both in person and through instructional videos.

Dr Eng. Katarzyna Panasiuk is an Assistant Professor at the Faculty of Mechanical Engineering of Gdynia Maritime University. She defended her PhD in 2019, focusing on the recycling of composite materials. During the conference, she will present a lecture entitled “The Eco-Yachting Industry in the Context of Sustainable Development.” Her research focuses on the strength and deformation of composite materials using non-destructive testing methods. She also has professional experience as a composite technologist in the yacht industry, particularly in the design and implementation of infusion systems used in structural manufacturing, as well as in methods for repairing composite structures. Dr Katarzyna Panasiuk has supported the solar boat project from the very beginning of the team’s #RoadToMonaco journey, helping to strengthen scientific cooperation between Poznań University of Technology and Gdynia Maritime University. She also introduced members of the Student Research Group to the fundamentals of laminated boat construction, including hand lay-up and vacuum infusion techniques.

Michał Wójtowicz represents the sales department of a Polish manufacturer of engineering solutions for the transport sector. He works with strategic clients in the railway and tram markets, specializing in insulation systems and composite flooring solutions. His goal is to implement proven and technologically innovative solutions in related markets.

Adrian Skubis is a Public Relations expert and journalist. For the past 10 years, he has served as a Management Board Advisor for Communications at the Polish Motorboat and Water Ski Association. He is also currently associated with WTS Sparta Wrocław speedway club, where he is responsible for media relations and external communications. In addition, he serves as Press Officer during the Wrocław rounds of the Speedway Grand Prix World Championship series and as Editor-in-Chief of “KILWATER”, the official magazine of the Polish Motorboat and Water Ski Association. At the Polish Olympic Committee, he is Vice-Chairman of the Non-Olympic Sports Commission. From 1998 to 2007, he worked in the sports newsrooms of TV4, Polsat, Polsat Sport, and Eurosport, where he produced news programmes and sports magazines and worked as a commentator on events including Formula 1, Champ Car, A1 Grand Prix, GP2, Supersport, Superstock motorcycle racing, and the IRC rally series. From 2007 to 2013, he served as Communications Director and Press Officer of Ekstraklasa S.A., Poland’s professional football league. Privately, he is a devoted Liverpool FC supporter, a fan of extreme sports and motorsport, and an enthusiast of martial a